Product Description
CNC Cut Plywood:
All of the cnc cut plywood for the Class Globe 5.80. The plywood kit is cut from a combination of 9mm okoume marine plywood for the interior parts and 9mm Meranti marine plywood for all of the hull exterior per the class guideliens for the US kit. As was determined very early on 9mm meranti for the hull instead of 10mm okoume can be used with 1 extra layer of fiberglass on the exterior. If you purchase only the plywood components you will need to source your own solid timber framing and manually cut them.
Not included:
The CNC kit with timber package still requires quite a bit of solid timber to be purchased by the builder for the long side stringers/chine battens. This is because these parts require scarfing unless long timber is available and we decided not to ship these pieces with scarf joints and instead let the builder source this material.
Note on portlight cutouts: Port cutouts are left solid in the sheer strake panel as boats meant for ocean racing must only have a single port in this panel. Make sure you are up to date on all the required specs for a class legal ocean racing build. The 5.80 website is the place to learn about this.
