Created with Sketch. Created with Sketch. svg-arrow-next svg-arrow-prev

Hardware and Accessories

  • 2" Snap Shackle

    This is a spring loaded "snap-hook" great for quick rigging and unrigging.

    Add to Cart
  • 20mm BB Standup Block

    Ronstan 20mm ball bearing standup block. Works with up 1/4" line Uses for this block include: -Redirecting lines such as halyard, downhaul, snotter that are coming down from the main mast aft to...

    Add to Cart
  • AERÉ Inflatable Beach Roller (9" x 60")

    Brand: AERÉColor: YellowFeatures: 2000 Lbs capacity9 inches x 60 inchesMade from Heavy Duty MaterialsLoop on one endFully Inflatable and DeflatablePublisher: AERÉ Docking SolutionsDetails: The original AERÉ inflatable beach roller. Designed to roll...

    Add to Cart
  • Auto-release Clamcleat

    Seadog Auto-release mini cleat. We use these on all of our rudder downhaul lines. This cleat (when installed properly) will flip up and allow the line to be released when the line is highly loaded. Great for shallow water sailing where running aground...

    Add to Cart
  • B&B Windvane Self Steering Plans

    Plans for this windvane will include full size templates for all parts along with critical dimensions, recommended materials and things to watch out for. Some dimensions of the vane do not matter and allow this design to be fitted to almost all transom...

    Pre-Order Now
  • Boom Bail

    This is a stainless "strap" or boom bail. Used to hang hardware under the boom of a boat. This is used on the Spindrift for attaching the boom vang. 64mm (2 1/2") long. 4 x 5mm (3/16") dia. fixing holes.

    Add to Cart
  • ClamCleat

    Seadog 211 "racing junior" clamcleat. All aluminum construction. Good for high load applications. This cleat is used throughout the Core Sound series for securing all control lines and halyards.  When used with halyards especially it should be...

    Add to Cart
  • Harken Tiller Extension - Various Lengths 600mm

    Brand: HARKENFeatures: The simple and lightweight design has no unnecessary frills—every aspect contributes to its strength, stiffness, or comfort.The universal joint and nonslip foam grip are UV-protected and perfect for full dagger-grip and fingertip...

    Add to Cart
  • Hawk Wind indicator MK2

    Brand: HawkColor: MulticolouredFeatures: LITTLE HAWK MK2 APPARENT WIND INDICATOR (for Dinghies up to 6m) - mounts at front of mast at gooseneck heightPublisher: SCHAEFER MARINEDetails: Quick, accurate wind indication for smaller single-handed dinghies...

    Add to Cart
  • Large Eyestrap

    Large Stainless eyestrap. See harken site for exact dimensions.

    Add to Cart
  • Large SS lined fairlead #122

    Large: SS lined fairlead. Hole diameter 7/16" Perfect for redirecting larger lines such as sheets. Used on the Core Sound designs for redirecting main and mizzen sheets in the cockpit.  Will...

    Add to Cart
  • Medium Cam Cleat Wedge Kit

    Medium Cam cleat Wedge Kit. Sits under the cleat to change the angle. Incoming lines into a cam cleat need to be level with the cleat or coming "up" into the cleat not down into it or else they will pop out under load.  https://www.ronstan...

    Add to Cart
  • Micro Eyestrap

    Harken 281 micro eyestrap. Use this on top of a small cam cleat (Ronstan Rf-5001) as a fairlead works great! See harken for dimensions.  

    Add to Cart
  • Mini ClamCleat (no fairlead)

    Seadog 222 "mini" clamcleat. All aluminum construction. Does not have a fairlead like the CL-211. Good for things like rudder uphauls where a smaller cleat is desirable.  Works well for 3/16" and 1/4" line.  https://sea-dog...

    Add to Cart
  • Plastic ClamCleat

    Seadog 203 clamcleat. All plastic. Good for lower load applications such as where you already have a lot of purchase on the line.  Works well for 3/16" and 1/4" line.  

    Add to Cart
  • Racelite Cheek Block

    We really like this little cheek block. It runs on an acetal sheave (no ball bearings) but works extremely well and is very low profile. This block is used on all of our sprit booms for running reefing lines forward as well as on our Spindrifts as a...

    Add to Cart
  • RL-358 Rudder Gudgeon

    Light duty rudder fitting for use with RL 358 Pintle. Made from 5/8" wide by .060" thick stainless steel. Fits a 5/16" diameter pin. Total length is 4". Takes #10 fasteners. This gudgeon is used with all of our Designs under 15' feet such as the...

    Add to Cart