Notes: You will need a "rivet spacer" in order to set this rivet inside our sailtrack with a standard rivet gun.
This rivet is used in the transition area between our mast tubes where a wedge is used to blend the tracks transition from the larger tube to the smaller tube. The extra grip range provided allows the rivet to reach the inside wall of the smaller tube in this area. Approximately 10 of these rivets are used above each mast joint in this transitional area.
Each 8 foot piece of sailtrack has 36 rivet holes.
Grip Range: .251-.375"
Head Style: 120 Degree Countersunk
Body Diameter: 5/32
Material: 18-8 Stainless Rivet w/ Stainless Mandrel
Max Length: .525