Spindrift 9

Spindrift 9 FIberglass Kit

Includes:  2 Epoxy pumps1 pound of Cabosil/wood flour "B&B blend" 1/2 pound of 3M Microspheres 1 roll of 3" x 10oz fiberglass tape (150ft)

Spindrift 9 Plans

Spindrift 9 plans come printed on 11x17" sheets with all details of construction and also include 24" roll paper full size templates of all parts ready to cut and transfer to plywood to make cutting the parts out a breeze.  ...

S9-Standard Digital Plans

Instructions: Plans contain both Imperial AND Metric versions for simplicity. Use the one you are more comfortable with. Does NOT contain full size templates. Files are in PDF format. After purchase we will email you your official hull number. This is...

S9-Nesting Digital Plans

Instructions: Plans contain both Imperial AND Metric versions for simplicity. Use the one you are more comfortable with. Does NOT contain full size templates. Files are in PDF format. After purchase we will email you your official hull number. This is...

Spindrift 9 CNC Plywood Kit

This kit includes all of the CNC cut plywood for the hull as well as the building cradels, temporary frame (standard version) and the cnc shaped rudder and daggerboard. It also includes CNC cut solid wood parts such as the tiller, rudder cheek spacer,...

4.5 gal Epoxy and Fiberglass Kit

Our standard small boat epoxy kit includes:-4 1/2 Gal of epoxy-2 metered pumps-2 pounds of our B&B Blend cabosil thickener (slight brown color)-2 x 50 yard rolls of 3" fiberglass tape.

Spindrift 9 Reefing Mainsail

Dacron Mainsail includes battens, sail logo and your hull number and a basic bag.The reefing sail features a zipper running the length of the sleeve and the sail is hoisted with a halyard as the zipper is closed around the mast. This allows the sail to...

Spindrift Rigging

Rigging common to all spindrift models 9-12. Standard Rigging (for reefing main) Racelite curved gooseneck w/ tack fitting 1 Racelite low profile cheek block 4 Seadog Racing Junior Clamcleat 3 Seadog black plastic clamcleat 1 Clamcleat...

Spindrift 9 Lines

Spindrift 9 Feet Meters color Main Sheet 2:1 (end boom sheeting) 35 10.7 BLUE Traveler 5 1.5 blue Halyard 36 11.0 Black Vang (upper) 5 1.5 black Vang (lower) 6 1.8 blue Reef Line 25 7.6 red Rudder Uphaul 5 1.5 red Rudder Downhaul 5 1...

Spindrift 9 Mast Kit

Includes 3 6061-T-6 aluminum tubes and cnc machined starboard plastic plugs for the top and bottom. The bottom plug is machined with a key shape to fit our cnc cut laminated mast step. The mast kit requires fiberglass tape and epoxy for assembly. The...

CNC shaped Plywood Mast Step

CNC cut mast step designed to go along with the CNC machined starboard end cap for our mast kits.  This mast step is laminated from layers of marine plywood then CNC machined to match our starbaord mast step and the shape of the hull at the forward...

Small Rudder Hardware Kit

This kit contains all the hardware necessary for our smaller boats such as the Spindrifts and catspaw designs. -Racelite 358 Gudgeons and Pintles-Racelite 337 Rudder hold down clip-Ronstan 1127 Tiller Swivel-Ronstan 43E Tiller Extension...

Mini Anderson Bailer

Mini Anderson Bailer. Auto suction bailer for a small dinghy such as the Standard Spindrift models, Amanda or Catspaw.  For a video of how we install this type bailer watch this video (small bailer used in video but method is the same for large...

Spindrift mast base plate

Note: This aluminum mast base plate is inlcuded in the standard spindrift rigging kit.  The base plate is common to all Spindrift models. It is 1/8" thick 6061 aluminum bent and drilled. Five countersunk #10 screws attach the base plate to the top...